DREAM ELECTRONIQUE

The type (M,L or backpack ) varies according to frequency used by the transmitter.

Receiving antenna for electro-fishing devices type HERON ^® ou AIGRETTE ^®.

Cable connecting the contact handle to CPU or to remote control winder. 

cable ordered by meter.

3-wire cable male-female to connect CPU to anode carrier stick or backpack transmitter to anode carrier stick.

New 4-pin plug for better strength: the anode carrier stick plug to connect anode cable has 4 contacts.

Anode carrier stick for electro-fishing devices type HERON^® or AIGRETTE^®.

The type of charger, M or H, depends on the frequency used by the transmitter.

Display the actual fishing time

Spark plug spanner for HONDA engine.

Vent for tailpipe of HONDA engine.

Cable winder for anode, cathode and remote control.

Pipe and accessoiries to deflect exhaust gases and reduce engine noise.

Nut used to bolt the cathode electrode on the cathode cable or to bolt the anode electrode ring on the anode carrier stick.

Anode or cathode electrode

Radio remote control for electro-fishing device type AIGRETTE^® or HERON^®.

Socket for anode cable.

Plug for single-wired cable, type anode carrier stick cable  for HERON ^® or AIGRETTE ^® or cathode cable for  MARTIN PECHEUR ^®.

Aluminium crank for cable winder of anode or remote control.

Snap hook to pull anode cable connected to the MARTIN PECHEUR or to the backpack radio transmitter. It avoids while walking to pull directly on the connectors.

Pair of rubber gloves with or without magnet.

Rubber handle for HERON ^® or AIGRETTE ^® frame.

Multiple socket used to fish with several anodes. 1 input and up to 4 outputs.

Extension cord (male-female), cross section 2.5mm ² used between the CPU and the cable winder for cathode cathode or when electro-fishing with several anodes.

Radio receiver unit for device type AIGRETTE ^® or HERON ^®. Depending on the frequency used, the CPU must be returned to us.

Puncture-proof wheel for frame of device type HERON ® or AIGRETTE ®.

Ergonomic back bag to carry the radio remote control transmitter when fishing with configurations # 1 and # 2.

Remote control by manual contact (button) or by foot (pedal). The remotes are connected by a cable to the transmitter or directly to the CPU type AIGRETTE ^® or HERON ^®.